Dismountable roll container ('Basic' with 4 walls) Used

Bottom
1 blue or red plastic pallet 820 x 680 mm, insides reinforced with 4 metal strips. Your name or logo can be hot-stamped in white to short sides. Supplied with two Ø 100 or 125 mm fixed castor wheels and two swivel castors with polyamide, polyurethane or vulcanised rubber tread.

Walls
2 demountable sides size 800x1500 mm and 1 back wall, made of Ø 19 mm tube and 2x2 strips 25 x 3 mm. The back wall is equipped with two clamps to clamp the back wall onto the sides. On the front 1 half drop gate of Ø 19 mm tube.

Note board
On each side wall a blank note board is attached.
The note board can be supplied with your name or logo embossed or punched in letters.

Nested and loaded use:
Number inside a 13.6 meter truck
· Stacked: 270 pieces
· Loaded: 60/54 pieces

Castor wheel set
The roll container is mounted on two fixed wheels and two swivel wheels Ø 100 mm or Ø 125 mm, supplied with polyamide, polyurethane or vulcanised rubber tread.

Finish
All steel parts are galvanised.